Sorry your browser is not supported!

You are using an outdated browser that does not support modern web technologies, in order to use this site please update to a new browser.

Browsers supported include Chrome, FireFox, Safari, Opera, Internet Explorer 10+ or Microsoft Edge.

FPSC Classic Product Chat / Need a little help. Again..

Author
Message
Mammoth Moth
16
Years of Service
User Offline
Joined: 8th Jun 2008
Location:
Posted: 18th Jun 2008 04:55
Link
I am sorry for all these questions but here it is again. I have a room with 3 floor tiles like this
++
+
I want to put a wall surounding it. Everytime I try, I use the paint wall and I click pick segment, and put it on, it changes the floor, and I need that floor. Any ideas? I tried so many times with no luck.

Thank you in advanced,
Bryce.
Back to top
Profile PM
Plystire
21
Years of Service
User Offline
Joined: 18th Feb 2003
Location: Staring into the digital ether
Posted: 18th Jun 2008 05:11
Link
Try painting the walls from the "outside" instead of from where the floors are.

Segments cannot share walls and floors... so if you try to use a wall where another segment's floor is, then the new segment is going to replace the floor with it's floor.


The one and only,


Back to top
Profile PM Email
Mammoth Moth
16
Years of Service
User Offline
Joined: 8th Jun 2008
Location:
Posted: 18th Jun 2008 05:17
Link
I am trying to place it on the outside it works but like this
++
+=
The = which should be a ceiling turns to the floor of the wall im trying to put on the outside of the room...
Back to top
Profile PM
RedneckRambo
17
Years of Service
User Offline
Joined: 19th Oct 2006
Location: Worst state in USA... California
Posted: 18th Jun 2008 05:34
Link
My suggestion to you is to buy signs 4 or get some kind of program that allows you to make your own segments. That way you can have your own walls and you can place them down fine without changing the ground/ceiling.


Back to top
Profile PM Email Website
Silvester
18
Years of Service
User Offline
Joined: 7th Dec 2005
Location: Netherlands
Posted: 18th Jun 2008 08:16
Link
Odd, I never had trouble with paining it from the side where there is no floor.

SOTA Engine
Purchase
Source and Non Source versions available!
Back to top
Profile PM Email
Nickydude
Retired Moderator
17
Years of Service
User Offline
Joined: 4th Nov 2006
Location: Look outside...
Posted: 18th Jun 2008 10:24 Edited at: 18th Jun 2008 10:25
Link
Are you pressing 'M' to paint in wall mode only?

Back to top
Profile PM
Plystire
21
Years of Service
User Offline
Joined: 18th Feb 2003
Location: Staring into the digital ether
Posted: 18th Jun 2008 12:11
Link
I think what he's saying is he wants a wall from a different segment, but he can't because there's a floor on the other side that's currently acting as the cieling for one of the rooms below.


The one and only,


Back to top
Profile PM Email
Mammoth Moth
16
Years of Service
User Offline
Joined: 8th Jun 2008
Location:
Posted: 18th Jun 2008 19:25
Link
Thats exacually what I am trying to do Plystire.
Back to top
Profile PM
Mammoth Moth
16
Years of Service
User Offline
Joined: 8th Jun 2008
Location:
Posted: 19th Jun 2008 01:09
Link
I fixed some of the issue this is how it looks
x = wall
F = floor
C= ceiling
B = bathroom wall
XX
XFFX
XFXC
BBB
B

You see where it has XFXC
BBB
The B right under the F has the bathroom tiles on BOTH sides. I was one side to be bathroom and one side to be my tanned one.
Back to top
Profile PM
Gunn3r
18
Years of Service
User Offline
Joined: 12th Jun 2006
Location: Portland, OR
Posted: 19th Jun 2008 02:13
Link
While in wall painting mode ('M'), click on the B tile that you want the wall to be on, but have it face towards the XFXC row. That should do it. If not, then I don't know what to tell you.


Gunn3r Games
Back to top
Profile PM Email Website
RedneckRambo
17
Years of Service
User Offline
Joined: 19th Oct 2006
Location: Worst state in USA... California
Posted: 19th Jun 2008 19:49
Link
Mammoth post a screenshot please.

Quote: "XX
XFFX
XFXC
BBB
B"

Those are just making me feel retarded.


Back to top
Profile PM Email Website
Back to top

Login to post a reply

Server time is: 2024-10-11 03:23:18
Your offset time is: 2024-10-11 03:23:18