Sorry your browser is not supported!

// Dark GDK - The Game Creators - www.thegamecreators.com

// the wizard has created a very simple project that uses Dark GDK
// it contains the basic code for a GDK application

// whenever using Dark GDK you must ensure you include the header file
#include "DarkGDK.h"
#include "globstruct.h"
#include "global.h"
/*
	n0_simpleVertex
		For å holde 3d-punkt data, med XYZ.
*/
struct n0_simpleVertex
{
	float x;
	float y;
	float z;
};

/* Prototyper for å lage egene vertices */
bool CreateNewObject				( int iID, LPSTR pName, int iFrame );
sObject* dbGetObject				( int iID );
bool SetupMeshFVFData				( sMesh* pMesh, DWORD dwFVF, DWORD dwVertexCount, DWORD dwIndexCount );
bool SetupStandardVertex			( DWORD dwFVF, BYTE* pVertex, int iOffset, float x, float y, float z, float nx, float ny, float nz, DWORD dwDiffuseColour, float tu, float tv );
bool SetNewObjectFinalProperties	( int iID, float fRadius );
void SetTexture						( int iID, int iImage );

/*
	n0_CreateNewObject
		int obj - Objekt nummer
		int noVer - Antall vertices
		int noInd - Antall indekser
		n0_simpleVertex verList[] - Array med alle vertex data
		int indList[] - Array med alle index data
*/
void n0_CreateNewObject( int objnr, int noVer, int noInd, n0_simpleVertex verList[] , int indList[] )
{
	CreateNewObject( objnr , "" , 1 );
	sObject* obj = dbGetObject( objnr );
	SetupMeshFVFData( obj->pFrame->pMesh , D3DFVF_XYZ | D3DFVF_NORMAL | D3DFVF_TEX1 , noVer , noInd );

	for( int vIndex = 0; vIndex < noVer; ++vIndex )
	{
		SetupStandardVertex( obj->pFrame->pMesh->dwFVF , obj->pFrame->pMesh->pVertexData , vIndex , verList[vIndex].x , verList[vIndex].y , verList[vIndex].z , 0.0f , 0.0f , -1.0f , 0 , 0.0f , 0.0f );
	}

	for( int iIndex = 0; iIndex < noInd; ++iIndex )
	{
		obj->pFrame->pMesh->pIndices[ iIndex ] = indList[ iIndex ];
	}

	obj->pFrame->pMesh->iPrimitiveType = D3DPT_TRIANGLELIST;
	obj->pFrame->pMesh->iDrawVertexCount = 3; //noVer;
	obj->pFrame->pMesh->iDrawPrimitives = 1; //obj->pFrame->pMesh->dwIndexCount / 3;

	SetNewObjectFinalProperties( objnr , 0.0f );
	SetTexture( objnr , 0 );

	//// Lager objektet
	//CreateNewObject( obj , "" , 1 );

	//// Peker til objekt-data
	//sObject* pObject = dbGetObject( obj );

	//// Peker til mesh-data
	//sMesh* pMesh = pObject->pFrame->pMesh;

	//// Setter opp FVF-format
	//SetupMeshFVFData( pMesh , D3DFVF_XYZ | D3DFVF_NORMAL | D3DFVF_TEX1, noVer , noInd);

	//for(int x=0; x < noVer + 0; x++)
	//{//															Index
	//	SetupStandardVertex ( pMesh->dwFVF , pMesh->pVertexData , x , verList[x].x , verList[x].y , verList[x].z , 0.0f , 0.0f , -1.0f , 0 , 0.0f , 0.0f );
	//}

	//// Skriver index-data
	//for(int x=0; x < noInd + 0; x++)
	//{
	//	pMesh->pIndices[x] = indList[x];
	//}

	//pMesh->iPrimitiveType = D3DPT_TRIANGLELIST;
	//pMesh->iDrawVertexCount = noVer;
	//// pMesh->dwIndexCount = noInd;
	//pMesh->iDrawPrimitives = pMesh->dwIndexCount / 3;

	//// dbLoadImage("C:\gress.bmp" , 1);
	//SetNewObjectFinalProperties( obj , 0.0f );
	//SetTexture( obj , 0 );

}

// the main entry point for the application is this function
void DarkGDK ( void )
{
	// turn on sync rate and set maximum rate to 60 fps
	dbSyncOn   ( );
	dbSyncRate ( 60 );

	//const int kol = 100;
	//const int rad = 100;
	//const int square = 10;

	//const int vArraySize = (kol + 1) * (rad + 1);
	//const int iArraySize = kol * rad * 6;

	n0_simpleVertex vArray[2];
	vArray[0].x = 0.0; vArray[0].y = 0.0; vArray[0].z = 0.0; // A
	vArray[0].x = 1.0; vArray[0].y = 1.0; vArray[0].z = 0.0; // B
	vArray[0].x = 1.0; vArray[0].y = 0.0; vArray[0].z = 0.0; // C

	n0_CreateNewObject( 1 , 2 + 1 , 0 , vArray , NULL );


	//n0_simpleVertex vertexArray[vArraySize];
	//int indexArray[iArraySize];

	//// Loop for å fylle inn vertex-arrayen
	//int teller = 0;
	//for(int d = 0; d < kol + 1; ++d)
	//{
	//	for(int a = 0; a < rad + 1; ++a)
	//	{
	//		// Fylle inn vertex-array
	//		vertexArray[teller].x = d * square;
	//		vertexArray[teller].y = 0;
	//		vertexArray[teller].z = a * square;
	//		++teller;
	//	}
	//}

	//// Loop for å fylle inn index-arrayen
	//teller = 0;
	//for(int j = 0; j < kol; ++j)
	//{
	//	for(int r = 0; r < rad; ++r)
	//	{
	//		// Fylle inn index-array
	//		indexArray[teller] = 1 + r + j * (rad + 1)	;	++teller;
	//		indexArray[teller] = rad + 2 + r + j * (rad + 1)	;	++teller;
	//		indexArray[teller] = (rad + 1) + r + j * (rad + 1)	;	++teller;
	//		indexArray[teller] = 1 + r + j * (rad + 1)	;	++teller;
	//		indexArray[teller] = r + (j + 1) * (rad + 1);	++teller;
	//		indexArray[teller] = r + j * (rad + 1)		;	++teller;
	//	}
	//}

	//dbMakeObjectCube( 2 , 25.0f );
	//n0_CreateNewObject( 1 , vArraySize + 1, iArraySize + 1, vertexArray , indexArray );	

	//CreateNewObject( 10 , "" , 1 );
	//sObject* obj = dbGetObject( 10 );
	//SetupMeshFVFData( obj->pFrame->pMesh , D3DFVF_XYZ | D3DFVF_NORMAL | D3DFVF_TEX1 , 3 , 0 );

	//SetupStandardVertex( obj->pFrame->pMesh->dwFVF , obj->pFrame->pMesh->pVertexData , 0 , 0.0f , 0.0f , 0.0f , 0.0f , 0.0f , -1.0f , 0 , 0.0f , 0.0f );
	//SetupStandardVertex( obj->pFrame->pMesh->dwFVF , obj->pFrame->pMesh->pVertexData , 1 , 1.0f , 1.0f , 0.0f , 0.0f , 0.0f , -1.0f , 0 , 0.0f , 0.0f );
	//SetupStandardVertex( obj->pFrame->pMesh->dwFVF , obj->pFrame->pMesh->pVertexData , 2 , 1.0f , 0.0f , 0.0f , 0.0f , 0.0f , -1.0f , 0 , 0.0f , 0.0f );

	//obj->pFrame->pMesh->iPrimitiveType = D3DPT_TRIANGLELIST;
	//obj->pFrame->pMesh->iDrawVertexCount = 3;
	//obj->pFrame->pMesh->iDrawPrimitives = 1;
	//SetNewObjectFinalProperties( 10 , 0.0f );
	//SetTexture( 10 , 0 );

	// our main loop
	while ( LoopGDK ( ) )
	{
		if( dbSpaceKey() )
		{
			dbSetObjectCull( 1 , true );
		} else {
			dbSetObjectCull( 1 , false );
		}

		if( dbObjectExist( 1 ) )
		{
			dbText( 0 , 0 , "LOL" );
		}

		dbShowObject( 1 );

		// update the screen
		dbSync ( );
	}

	// return back to windows
	return;
}