Sorry your browser is not supported!

You are using an outdated browser that does not support modern web technologies, in order to use this site please update to a new browser.

Browsers supported include Chrome, FireFox, Safari, Opera, Internet Explorer 10+ or Microsoft Edge.

DarkBASIC Professional Discussion / F5 Compile fails (no exe) but F6 compiles (F7 also fails) - Help.

Author
Message
Daryn Alsup
18
Years of Service
User Offline
Joined: 5th Jul 2008
Location: In your head... dun dun DUN!!!!!!!!
Posted: 1st Dec 2012 03:10
Link
So I hit a bump in the road - a new programmer (my partner) decided to do some programming for the first time - but installed an old plug-in - it caused all my projects to not compile (f5) - they appear to compile, but never do unless (f6) - no error is reported unless (f6) is used, in which case it "fails to compile exe". I uninstalled, restarted, reinstalled and am still suffering the same problems. I am windows 7, amd fx 950 8 core processor, HD ati 4550 video card, 8 gig ram.

I noticed that the compiler is not called, except in debug (aka if you push F6) with command prompt open, f4, f5, and f7 do nothing. I've reinstalled in both the old disk (C:\) and a new disk... as well as looked up the Registry values and deleted them after uninstalling. No avail and I don't know what to do... the partner shall buy a new computer if he wants to code... hands off my baby!!! Baby!!!! lolol.

Any help would be greatly appreciated and I wasn't quite sure where to post this as I've not had many issues with DBPro. It didn't seem like a bug. Any tips or help solving the problem. I've also looked and found that sometimes PAK and BAK files can cause issues if they're not deleted and replaced by the editor. Even new projects wont compile, replaced code wont compile - a simple "do-loop" two liner wont compile. I am without hope.

Hewp Mwe

I see a lil' byte, its 1/4th a dword, Double float, Double float - but it doesnt beat a Global. Very very frightning, integers dividing me! Look a constant oh a constant. Oh-oh I just want the byte!
Back to top
Profile PM Email Website
MrValentine
AGK Backer
15
Years of Service
User Offline
Joined: 5th Dec 2010
Playing: FFVII
Posted: 1st Dec 2012 04:34
Link
What?

Which version of DBP are you using, which editor, and did you install DBP correctly and run once with Admin Mode?

Also have you licenced all your plugins?

Back to top
Profile PM
Kezzla
17
Years of Service
User Offline
Joined: 21st Aug 2008
Location: Where beer does flow and men chunder
Posted: 1st Dec 2012 06:53
Link
i had similar issues, my compile would only work in debug mode. I just reinstalled dbpro and it all worked again.

Back to top
Profile PM
Green Gandalf
VIP Member
21
Years of Service
User Offline
Joined: 3rd Jan 2005
Playing: Malevolence:Sword of Ahkranox, Skyrim, Civ6.
Posted: 2nd Dec 2012 01:39 Edited at: 2nd Dec 2012 01:40
Link
Could the editor options have been changed somehow? Have you checked Tools/Customize here:





Back to top
Profile PM Email
Daryn Alsup
18
Years of Service
User Offline
Joined: 5th Jul 2008
Location: In your head... dun dun DUN!!!!!!!!
Posted: 2nd Dec 2012 23:17 Edited at: 2nd Dec 2012 23:20
Link
first of all I am using 7.6, second I dont know how to find the editor type but im 90% sure its the synergy base, and I installed in a location where windows isn't present (dissolves the admin issue to a degree) but just to be safe as well - with full admin. privileges.

Also Valentine, I've been running this version clean since it came out. I've been with Dark Basic since 2009/2008.

Kezzla I won't come down hard on you for not reading the post - I have done so numerous times to no avail. Keep a steady eye and open ear.

Had a little hope GG for minute, but no, those settings as well as the rest are as they should be - there is something internal that has seriously f%$#ed my s*&^ up

I see a lil' byte, its 1/4th a dword, Double float, Double float - but it doesnt beat a Global. Very very frightning, integers dividing me! Look a constant oh a constant. Oh-oh I just want the byte!
Back to top
Profile PM Email Website
MrValentine
AGK Backer
15
Years of Service
User Offline
Joined: 5th Dec 2010
Playing: FFVII
Posted: 3rd Dec 2012 00:16
Link
have you tried U77?

Back to top
Profile PM
Daryn Alsup
18
Years of Service
User Offline
Joined: 5th Jul 2008
Location: In your head... dun dun DUN!!!!!!!!
Posted: 3rd Dec 2012 07:14
Link
Problem solved - The update did it. I can only gather that values were not changed with the same installation of dbpro and update 7.6 - but whatever happened, whatever values needed to be changed or restored, the new update either corrected the issue, or resolved the problem with new values... and by values, I mean whatever was not correcting with reinstalling.

Back to programming and thank you all!!!!!!!

I see a lil' byte, its 1/4th a dword, Double float, Double float - but it doesnt beat a Global. Very very frightning, integers dividing me! Look a constant oh a constant. Oh-oh I just want the byte!
Back to top
Profile PM Email Website
MrValentine
AGK Backer
15
Years of Service
User Offline
Joined: 5th Dec 2010
Playing: FFVII
Posted: 3rd Dec 2012 07:21 Edited at: 3rd Dec 2012 07:21
Link
Happy to hear that now get making fun apps for us to test for you so that we can procrastinate more

Glad to have been of some help

Back to top
Profile PM
Back to top

Login to post a reply

Server time is: 2026-07-07 05:40:41
Your offset time is: 2026-07-07 05:40:41