Posted: 11th Oct 2006 03:25
Sept 30 2006
Atlanta LWUG
LightWave User Group
Meeting Report
Hello, this is John W. Gutmann reporting again.
I thought you might like to hear about what happened at the LWUG - Lightwave User Group Meeting.
Our first meeting in 2006 was held on September 30.
The meeting was held at the Amitrace retail store on Jimmy Carter.
Over the 4-hour period, from 11:00 AM to 2:30 PM, 6 people showed up for the event.
OK not a big number but it’s a start.
Meet and Greet period.
Everyone who attended was given a file folder with the following printed materials.
Meeting Agenda,
Dear Sweet Emma - Handout
Handout for - Machine Press Video Productions
script with col.xls
xyz_file_formats.xls
Modeler_Steps.xls
Handout - John W. Gutmann Letter of Introduction
Add me to your team V2.doc – Handout
What I can do for you
Why am I here
What I hope to learn
And a copy of the HDRI 3D Magazine. A $12.00 value
> From 11:00 AM till 12:30 we just mingled, talked and watched the DVD
“Add me to your team” video.
Around 12:30 PM John W. Gutmann opened the meeting and showed 30 seconds up to 3 min of the following video’s:
“Hire me - camera operator”
“30sec TV commercial for HL Computer”
“Technical Director”
“Master Control”
“After Hours Formalwear”
CIC ”Caught In Clapper”
Next we showed 5 minutes of a Lightwave Animated Film, “Dear Sweet Emma” an Animation
that used Lightwave software.
Next we showed an 11 minute Video taped interview with Rebecca Cernak one of the modelers for “Dear Sweet Emma”
Next we watched the Newtek Lightwave 3D demo DVD
Realize, Demo, dancing car
Stylize, More demo, bird from dear sweet emma
Creatives, Emile Smith talks- fire fly
Ron Thorton – Babalon 5, Capton Scarlet,
John Gross – Eden FX, Start trek, Alien, surface, Hello Boy,
Jarrod Davis – Zoic Studios, Fire Fly,
Next we watched some of the “Animusic 2” DVD
Starship Grove, Pogo Sticks, Resonant Chamber, Cathedral Pictures, Pipe Dream 2, Fiber , Bundles, Gyro Drums, Heavy Light
I am not sure, but some attendees believed that “Animusic 2” was not done with Lightwave, but it is none the less a great animation to watch.
Next we talked about Group Business. Largely it was an Open Q&A session.
We talked about a premise of meeting every other Month, rather than each month.
The next meeting maybe would be first Saturday in November
No late November meeting because of Thanksgiving Holidays
None in December - Christmas Holidays too busy
We discussed First Saturday in January
So when do we meet next?
Looks like November 4th 2006 I am currently waiting confirmation from Amitrace.
ScreamerNet - render farm, who is using it. One attendee, said he had set it up and got it working
We mentioned meeting at Dunkun Donuts - across street after the meeting close
A Request for Speakers Presenters was announced. Chris Baldwin volunteered for the next meeting.
Next we showed short Demo videos brought by Chris Baldwin and Curtis Henson.
Next we held a drawing for a “Animusic 2” DVD, Chris Baldwin won the DVD.
Finally John W Gutmann showed how to take xyz point data in Excel or Text files and how to use Lscript to get these points in Modeler.
First John reviewed the following 8x11 Print handouts
script with col.xls, xyz_file_formats.xls, and Modeler_Steps.xls
Then John did a “Hands on demo of how to do it”, on a computer with Lightwave installed.
The meeting closed around 2:30 PM.
Amitrace is normally closed on Saturdays, however Ray has
volunteered to come in and open up the store for the Lightwave User Group meeting.
Be sure to thank Ray for his support.
Amitrace
5344 Jimmy Carter Blvd.
Norcross, GA 30093
Hours of operation:
9:00 AM to 6:00 PM EST
Phone: 770-263-9190
Toll Free: 800-962-4489
Fax: 770-263-7852
http://www.amitrace.com/estore/
I have included a Map Quest link for those of you who are not
familiar with the area.
http://www.mapquest.com/maps/map.adp?address=5344%20Jimmy%20Carter%20Blvd&city=Norcross&state=GA&zipcode=30093%2d1501&country=US&title=%3cb%3e5344%20Jimmy%20Carter%20Blvd%3c%2fb%3e%3cbr%20%2f%3e%20Norcross%2c%20GA%2030093%2d1501%2c%20%20US&cid=lfmaplink2&name=
If you have a 3D video or 3D animation you would like to show or
present at the next Lightwave Meeting, Please contact me.
Looking for Speakers or Lightwave Presenters.
Or as an alternative, If you know of someone who you would like me to ask to speak, please send me their name and email. Briefly tell me why they should speak.
John W Gutmann
Lightwave_users@machinepress.com
