Sometimes my firewall alerts me that programs that use DP are trying to access the network.
Why is DP trying to access the network?
The executable has changed since the last time you used: F:program filesDark Basic SoftwareDark Basic ProfessionalProjectsphysx1physx1.exe
File Version : 1.0.0.0
File Description : DarkBASIC Pro Project
File Path : F:program filesDark Basic SoftwareDark Basic ProfessionalProjectsphysx1physx1.exe
Process ID : 0x3514 (Heximal) 13588 (Decimal)
Connection origin : local initiated
Protocol : Raw Ethernet
Local Address : 0.0.0.0
Local Port : 0
Remote Name :
Remote Address : 0.0.0.0
Remote Port : 0
Ethernet packet details:
Ethernet II (Packet Length: 56)
Destination: ff-ff-ff-ff-ff-ff
Source: **-**-**-**-**-**
Type: ARP (0x0806)
Address Resolution Protocol (ARP)
Hardware type: Ethernet (0x0001)
Protocol type: IP (0x0800)
Hardware size: 6
Protocol size: 4
Opcode: Request
Sender hardware address: **-**-**-**-**-**
Sender IP address: 192.168.1.107
Target hardware address: 00-00-00-00-00-00
Target IP address: 192.168.1.1
